Parker SMOKEETER SE-40, Руководство пользователя

Страница: 10 / 32

6
Owner's Manual:
SMOKEETER® Electronic Air Cleaner
2. Slide components from the cabinet.
NOTE: The SE 40 contains an ionizer and collection cell
as a one piece assembly known as a unicell.
FIGURE 5
6.2 Cleaning
Major cleaning is confined to the prefilter, ionizer, collection
cell and the inside cabinet. These should be cleaned
periodically to assure continued efficiency. Cleaning
may be required from once a month to once every four
months depending on the air quality.
NOTE: The carbon filter cannot be cleaned and needs
to be replaced as required.
1. Disconnect power to unit and remove components.
2. The ionizer, collection cell/unicell and prefilter can be
cleaned by soaking in a hot solution of SMOKEETER
brand detergent for 30 to 60 minutes. If possible,
agitate the solution to aid in dirt removal. If agitation
is not possible, soaking time should be increased.
C A U T I O N
DO NOT USE TEMPERATURE EXCEEDING 160°F AND DO
NOT STEAM CLEAN AS THIS MAY CAUSE PERMANENT
DAMAGE TO THE COMPONENTS. IF DETERGENT OTHER
THAN SMOKEETER BRAND IS USED, CARE MUST BE
TAKEN TO ASSURE THAT IT CONTAINS AN ALUMINUM
INHIBITOR SO THAT IT DOES NOT ATTACK THE ALUMINUM
COMPONENTS. BE SURE TO FOLLOW MANUFACTURER’S
CLEANING INSTRUCTIONS.
3. Remove the components from the detergent bath and
immediately flush away any residue and rinse thoroughly
with clear hot (less 160°F) water. Shake off excess
water and let components dry for 30 to 60 minutes.
Set the cell so that its plates are in a vertical position
for drainage.
4. Vacuum clean the interior of the cabinet and clean
off all electrical connections before reinstalling
the components.
5. Reinstall the components into the cabinet.
6. Apply power to unit and confirm indicator light
is illuminated.