6
Standards:
EN 61326-1:2006, Class B
EN
6100-3-2:2006
EN 6100-3-3:1995 +A1:2001 +A2:2006
EN 61010-1 Issued: 2001/03/01
Conforms to UL STD 61010-1:2012 Ed.3+R:29Apr2016
Certified to: CAN/CSA-C22.2 No 61010-1-12:2012 Ed.3+U1:U2
Installation & Start-Up:
Installation of the LabTec™ System must be carried out only by trained personnel in accordance
with the relevant regulations and this operations manual.
Make sure that the technical specifications and input ratings of the LabTec™ are observed. See
“LabTec™ Specifications”.
The protection provided by this equipment may be impaired if the LabTec™ is used in a manner
inconsistent with this manual or for purposes not specified by the manufacturer.
Maintenance & Cleaning:
The LabTec™ Methadone requires routine daily maintenance. The pump head in particular requires
daily flushing with an approved cleaning solution and distilled water for trouble free operation. This
is especially true with flavored methadone solutions. Please read the section on Cleaning
Procedures.
To remove dust, dirt and stains, the outer surfaces of the LabTec™ may be wiped using a soft, non-
fluffing cloth moistened with water. If required, you may also use a mild detergent or 2-propanol.
Introduction:
You will find the LabTec™ Methadone System easy to use and easy to calibrate. The state- of-the-
art hardware and software design of the LabTec™ allows you to control measure and document
your dispensing processes. With proper maintenance, the LabTec™ System will provide many
years of excellent service and performance.
