Owner’s Manual With Instructions
Parker Racor Absolute Oil Cleaner Demo Machine
Page | 1
Instruction #New 07202011
General Practices
If you have any questions concerning set up, operation or trouble shooting please call our Technical
Service, 1-209-521-7860 between 7:30 and 5:00 PST.
Safety and General Operating Practices
Do not operate in wet areas to prevent electrical shock.
Do not place hands on or around electric motor to prevent burn or electrical shock. The motor
and the pump unit may be hot on the surface.
The power must be turned off before servicing bypass or full-flow filter.
Before starting the Demo set up familiarize yourself with the set-up and operating procedure.
Throughout this manual, the left side and right side are as you are facing the Demo Machine.
When lifting the unit always lift from under the frame. Do not attempt to lift using the acrylic
filter head. Damage to the unit will result.
Tools required: 5/8” / .625 allen wrench for storage tank fill plug and small funnel. Carefully
pour fluid to prevent spillage. Wipe up any fluid around machine to prevent slipping hazards.
Demo Purpose
The purpose for the demonstration machine is to show the difference in filtration ability between the
full-flow filter and the Racor Bypass Oil Cleaner.
Full-flow Filter
The full-flow filter is a typical pleated cellulose media spin-on oil filter found at any parts store and used
on a current internal combustion engine lube oil system. The typical filtration ability varies between 20
and 40 micron. The purpose is to filter all of the engine oil pumped from the crankcase through the filter
for engine component lubrication. The flow of the lube oil is in a radial direction.
