Parker PowerStation PA2 Series Скачать руководство пользователя страница 20

Страница: 20 / 58

Chapter 2: Installing the PowerStation

Installing an Optional AC Power Supply

PA2 PowerStation User Guide

2-10

Installing an Optional AC Power Supply

All PA2 PowerStation models can use 24 volt input DC power. The PA206

and PA200V PowerStation models can use 12 or 24 volt input DC power. In

either case, you can operate any PA2 PowerStation with AC power by using

an optional AC Power Supply available from Parker. Use this section only if

you intend to operate the PA2 PowerStation using AC power. If you plan to

use DC power, refer to Installing the PA2 PowerStation on page 2-7.

Caution: Do not apply AC power directly to the unit or damage may

occur.

Preparing a Location for the AC Power Supply

Be sure to select a location that provides protection from dust, oil,

moisture, and corrosive vapors. If your enclosure is large enough, you can

mount the Power Supply in the enclosure with the unit.

If you purchased Parker’s optional AC Power Supply, P1X-PWRAC and

mounting kit BKT-1000, use the template that came with the mounting kit

to prepare your location for the power supply. This can be inside the

enclosure where the PowerStation is installed.

Note: If you mount the Power Supply in an enclosure, mount it on the

bottom or on the side of the enclosure to provide the best convection

cooling.

Prepare the Power Supply Mounting Surface

The P1X-PWRAC AC power supply is designed to be mounted using two

metal brackets provided in the optional BKT-1000 mounting kit. These

brackets are secured to the mounting surface using four screws. To

prepare the mounting surface, complete the following steps:

Measure the cutout dimensions.

Securely attach the power supply template to the mounting surface.

Cutout the four 0.17” (4.3mm) holes as shown on the template.

Debur the edges of the cutout area, removing dirt and debris.

Mounting the AC Power Supply

After drilling the holes for the four screws, you can follow the steps below

to mount the power supply:

Attach the power supply to the mounting surface using the supplied

metal brackets.

Connect the power cord from the power supply to an AC power

source.

Содержание PowerStation PA2 Series



























































Результаты поиска

Содержание PowerStation PA2 Series

Отзывы:

Похожие инструкции для PowerStation PA2 Series

Бренды по названию

Популярные бренды

Parker PowerStation PA2 Series, Руководство пользователя

Результаты поиска

Содержание PowerStation PA2 Series

Отзывы:

Похожие инструкции для PowerStation PA2 Series

Бренды по названию

Популярные бренды