Parker PGMT-5200 Скачать руководство пользователя страница 40

Страница: 40 / 41

GUARANTEE

DECLARATION OF CONFORMITY

Description & Function:

52cc Petrol Multi Tool

Model/Type:

PGMT-5200

Manufacturing Date/Serial Number:

2017

Conforms to the following Directives:

☑ 2006/42/EC Machine Directive (MD)
☑ 2004/108/EC Electromagnetic Compatibility Directive (EMC)
☑ 2000/14 EC & 2005 /88 EC Directive of Emission
☑ 2000/14 EC & 2005 /88 EC Directive of EU Noise

Manufacturer’s authorised representative within the EC:

Parker Products Ltd.
Richmond Park
Richmond Road
Louth
LN11 0FU

Conforms to the requirements of the Directives, as
indicated, and the following harmonised standard(s):

☑ EN ISO 11681 - 1:2011
☑ EN ISO 14982 - 2009
☑ EN ISO 3744 - 1995
☑ EN ISO 9207 - 1995

EC type-approved No:

e11*97/68SA*2010/26*2712*00 (EUII Emission)

Technical file complied by:

Parker Products Ltd

Being the responsible person appointed by the manufacturer.

Signed:

Date:

19/03/19

Name:

Jason Parker

Position:

Managing Director

Parker Products Ltd Guarantees the product against defective material or damage for period of 12

months from the date of purchase. A proof of purchase must be provided with the product.

In case of any fault please return the product to Parker Products Ltd or an authorised repair agent.

If any fault is caused by defective materials or quality of build, repair will be carried out free of charge.

However, this guarantee does not apply in the case of normal wear and tear, nor any damage caused

by misuse, accident or any repair from an unauthorised agency.

NOTE: In order for you to effect this guarantee you must provide proof of purchase in the form of a

dated receipt or invoice within a 12 month period of purchase. If repairs are outside of the warranty

period a quote will be made accordingly.

Parker Products Limited

Содержание PGMT-5200










































Результаты поиска

Содержание PGMT-5200

Отзывы:

Похожие инструкции для PGMT-5200

Бренды по названию

Популярные бренды

Parker PGMT-5200, Руководство пользователя

Результаты поиска

Содержание PGMT-5200

Отзывы:

Похожие инструкции для PGMT-5200

Бренды по названию

Популярные бренды