manualshive.com logo in svg

Parker PGMT-5200, Руководство пользователя

Поделиться
Скачать
Parker PGMT-5200 Скачать руководство пользователя страница 11

20

21

BEFORE USING THE MULTI TOOL

BEFORE USING THE MULTI TOOL

1

INSPECT THE MULTI TOOL

Check the Multi Tool is not damaged and all 

components are in good working order before use. 

Regular periodic inspection is required to ensure the 

Brush cutter is suitable for the task.

Before using the Multi Tool a risk assessment should 

be carried out respecting the legislation in the country 

of use.

NOTE:

 This Multi Tool is not supplied with any fuel or oil within the engine, there is only trace left from testing.

NOTE: 

The fuel for this machine must be mixed with 2 stroke oil at a 40:1 ratio (Gasoline:Oil)

WARNING!

 Do not start without adding a 40:1 ratio (Gasoline:Oil) first, failure to do so will damage the engine.

The locking washers may come pre-installed on the 

hub of the machine.

The hub in needs assembling in different 

configurations to fit the appropriate attachments.

Washer 'A' needs to be installed at all times regardless 

of which attachment is fitted to the hub..

2

LOCKING WASHERS

NOTICE

THE HUB ON THIS MACHINE 

COMES PRE-ASSEMBLED

NOTE:

 Please follow all instructions carefully when fitting the various cutting attachments

WARNING!

 Do not start the Multi Tool without making sure the cutting attachments are fitted properly.

NOTICE

THIS FUEL MUST BE

MIXED WITH 2 STROKE

OIL AT A 40:1 RATIO

(GASOLINE:OIL)

40:1

Содержание PGMT-5200










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды