Parker PEPW-2000, Руководство пользователя

Страница: 18 / 22

34 35
MAINTENANCE
MAINTENANCE
When the Nozzle gets blocked it will cause the pump to build pressure and may cause the unit to surge damaging the machine.
Only attempt to clear the Nozzle when the machine is Off(0) and has been fully purged of any pressure.
Move the Nozzle pin back and forth whilst
inserted into the Nozzle Jet. This will help rid the
jet of any deposits that may have built up during
use.
3
DISLODGE BLOCKAGES
Check the Nozzle jet regularly to ensure that
there are no blockages or built up residue.
1
UNBLOCK LANCE
Clean the Nozzle jet by inserting the Nozzle Pin
into the Nozzle Jet.
2
INSERT NOZZLE PIN
A blocked water inlet can restrict water supply to the pump which in turn can damage the machine.
You can not use the inlet rubber seal and filter at the same time. Remove the rubber seal if you wish to use the filter.
If using the inlet filter, remove the filter and
clean any residue from the filter and Inlet
that may have built up during use.
3
INLET FILTER
The water inlet must be inspected regularly
to avoid blockages.
1
WATER INLET
Remove the water inlet and inspect.
Remove the rubber seal and clean any
residue from the seal and Inlet that may
have built up during use.
2
INLET RUBBER SEAL