Parker Parkrimp 2 - 83CE-083U, Инструкция по эксплуатации

Страница: 1 / 36

Maintenance
6-2
6.1 Daily maintenance
Maintenance objects Actions (to be performed by operator)
Figure 6-2 Plant
Perform a visual inspection of the plant
for
 cleanliness
 leaks
 outside damage
Figure 6-3 Crimping tool
Perform a visual inspection of the crimping tool
for
 cleanliness
 proper condition
Figure 6-4 Level indicator
 Check the hydraulic oil level on the level indi-
cator.
 The oil level is in the centre.
 Remove oil, dirt dust and chips using a vacu-
um cleaner.
Construction and Function
3-4
3.2.1 Assembly instructions
Figure 3-7 Rear die ring half

Move cylinder and pusher fully up.

Push rear die ring half up and lock it using a pin.
Figure 3-8 Adapter element

Insert adapter element into die holder. Tilt it slight-
ly and position correctly.
Figure 3-9 Die set

Insert die set into lubricated tool holder ensuring
that the individual segments are distributed even-
ly. The die sets are colour-coded according to
hose size.
Construction andConstruction and Function
3-3
Figure 3-5 Front crimp ring half mounted
Figure 3-6 Control panel
1 Lift pusher
2 Lower pusher

Move the pusher up (lift pusher).

Remove the front crimp ring half.

Remove the workpiece from the tool (safety dis-
tance 120 mm minimum).

Check the correct seat of the fitting and the cor-
rect dimension.
2
1
Parkrimp
®
2 – 83CE-083U
Instruction Manual
Instruction Manual
Hose Crimper Machine Parkrimp

2 83CE-083U