Bulletin 4480-T12/UK
Hose Crimper Machine Parkrimp
®
2
Construction and Function
3-2
3.2 Function
Figure 3-2 Safety distance 120 mm minimum
Figure 3-3 Adapter cone and die set
Figure 3-4 Eyelet ring and rear crimp ring half
Crimpers are dangerous machines
– they can easily cut off parts of your body –
always be aware of this risk during work.
Always check the movements of your hands
with your eyes when loading and unloading the
workpieces – to ensure that you only perform
controlled movements.
To protect your hands always ob-
serve the safety distance of 120 mm minimum
to the crimping tool.
The minimum requirements for cor-
rect crimping include:
Fitting and tool have been tuned to each
other.
The correct spacer ring, the correct adapter
cone and the correct die set have been
mounted.
Mark the hose insertion depth on the hose.
Push the hose into the fitting up to the
marked insertion depth.
Put a preassembled workpiece into the tool
from the bottom (safety distance of your
hands 120 mm minimum).
Unlock the rear crimp ring half using the
eyelet ring.
Mount the front crimp ring half.
Position the workpiece in the tool (safety
distance 120 mm minimum).
Start the crimping cycle (pusher down) on
the control panel and lower the pusher to
the stop.
Construction and Function
3-2
