Parker NX Series, Техническое руководство

Страница: 109 / 116

109 - PVD 3663_GB_NX_March 2017.Docx
4.
COMMISSIONING, USE AND MAINTENANCE
4.1. Instructions for commissioning, use and maintenance
4.1.1. Equipment delivery
All servomotors are strictly controlled during manufacturing, before shipping.
While receiving it, it is necessary to verify motor condition and if it has not been
damaged in transit. Remove it carefully from its packaging. Verify that the data
written on the label are the same as the ones on the acknowledgement of order, and
that all documents or needed accessories for user are present in the packaging.
Warning: In case of damaged material during the transport, the
recipient must
immediately make reservations to the carrier through
a registered mail within 24 h..
4.1.2. Handling
Servomotors are equipped with two lifting rings intended for handling.
Caution: Use only servomotors lifting rings, if present, or slings to
handle the motor. Do not handle the motor with the help of electrical
cables, connectors and water inputs/outputs, or use any other
inappropriate method.
The drawings below show the correct handling procedure.
DANGER: Choose the correct slings for the motor weight. The two
slings must the same length and a minimum angle of 50° has to be
respected between the motor axis and the slings.
50°mini