Parker NX Series, Техническое руководство

Страница: 77 / 116

77 - PVD 3663_GB_NX_March 2017.Docx
3.6. Cooling
In compliance with the IEC 60034-1 standards:
3.6.1. Natural and fan cooled motor
The ambient air temperature shall not be less than -15°C and more than 40°C.
It is possible to use the motors in an higher ambient temperature but
with an associated derating to the motor performances.
Warning: To reach the motor performances calculated, the motor
must be thermally well connected to a aluminium flange with a
dimension of 400 mm x 400 mm and with a thickness of 12 mm.
Caution: the ambient air temperature shall not exceed 40°C in the
vicinity of the motor flange
Warning: A significant part of the heat produced by the motor is
evacuated through the flange.

if the air is not able to circulate freely around the motor,

if the motor is mounted on a surface that dissipates not well the
heating (surface with little dimensions for instance),

if the motor is thermally isolated,

if the motor is mounted on a warm surface (mounted on a gearbox
for instance),
then the motor has to be used at a torque less than the rated torque.