Parker MX45S Series, Руководство по эксплуатации продукта

Страница: 5 / 30

MX45S Series Product Manual
5
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Chapter 1 - Introduction
Product Description
MX45S Positioner
The MX45S is a 45 mm wide miniature screw driven positioner based on the award winning MX80
family. Like its predecessor, the MX45S is designed for OEM applications requiring reliable linear posi-
tioning in space restricted applications. Designed with anti-cage creep crossed roller bearings, the
MX45S allows users to position up to 7 Kg of normal load on the stage’s three standard travel lengths
(5 mm, 15 mm & 25 mm).
The MX45S can be supplied with a high efficiency lead screw or a high precision ground ball
screw, both of which are capable of producing 40 N of thrust and reaching a linear velocity of 20 mm/s
and 30 mm/s respectively. The lead screw drive employs a PTFE coated screw with a preloaded nut to
deliver extremely smooth and quiet linear motion. A choice of two leads allows the user to match the
desired mix of velocity and resolution in order to best match the application’s requirements. The ball
screw drive is available in a 1 mm lead offering the user 3 µm bi-directional repeatability and 24/7 opera-
tion (100% duty cycle).
Unpacking
Carefully remove the positioner from the shipping container and inspect the unit for any evidence of
shipping damage. Report any damage immediately to your local authorized distributor. Please save the
shipping container for damage inspection or future transportation.
Incorrect handling of the positioner may adversely affect the performance of the unit in its application.
Please observe the following guidelines for handling and mounting of your new positioner.
DO NOT allow the positioner to drop onto the mounting surface. Dropping the positioner can generate
impact loads that may result in flat spots on bearing surfaces or misalignment of drive compo-
nents.
DO NOT drill holes into the positioner. Drilling holes into the positioner can generate particles and ma-
chining forces that may effect the operation of the positioner. Parker will drill holes if necessary;
contact your local authorized distributor.
DO NOT subject the unit to impact loads such as hammering, riveting, etc. Impacts loads generated
by hammering or riveting may result in flat spots on bearing surfaces or misalignment of drive
components.
DO NOT lift the positioner by cables or cable management system. Lifting positioner by cables or ca-
ble management system may effect electrical connections and/or cable management assembly.
The unit should be lifted by the base structure only.
DO NOT expose positioner to mist, spray or submersion in liquids.
DO NOT disassemble positioner. Unauthorized adjustments may alter the positioner’s specifications
and void the product warranty.