Parker Matrx Digital MDM, Руководство по установке, Страница: 4 / 28

2
WARNINGS
The MDM

and its accessories are designed to perform in accordance with specifications herein when
installed, operated and maintained as instructed in this manual. It should be carefully read and understood
prior to operation and use of the MDM.
This equipment is designed for use with an oxygen supply assuring 100% oxygen concentration. The use
of oxygen concentrators could result in an unsafe condition to the patient.
The MDM and its accessories are FACTORY adjusted and calibrated. Any alteration to these
adjustments may alter the accuracy and operation specified by the factory.
The MDM and its accessories in need of repair should be repaired ONLY by an Authorized by
MATRX/PARKER Dealer.
Replacement parts used to restore a MDM to its specified operation should be genuine MATRX/PARKER
manufactured parts or MATRX/PARKER recommended equivalent parts.
The MDM and its accessories are a specialized medical device and should be operated ONLY by a
professional trained in its use.
MATRX/PARKER may apply technical advances whenever it is desirable. Therefore, specifications of
this product are subject to change WITHOUT NOTICE. MATRX/PARKER should be contacted for current
information.
We cannot over stress the importance of the user performing their own test independent of the dealer or
contractor to verify that ALL gas pipelines are connected correctly. Properly connected pipelines are
essential to PATIENT SAFETY. Please refer to Page 33 of this manual for a simple test procedure. This
test procedure is NOT intended to replace any other test procedures required by NFPA 99c or local
building codes. It is intended for the user as an additional safety measure.
DESCRIPTION AND MECHANICAL ASSEMBLY
This manual covers the installation and operation of the MDM Nitrous Oxide/Oxygen mixer and it’s
mounting configurations including wall mounted, under counter mounted, and mobile stand mounted with
and without 2 or 4 cylinder gas yoke assembly. The MDM is a mechanical mixer for regulating the flow of
nitrous oxide and oxygen from a gas supply to a conscious patient for the purpose of conscious sedation
analgesia.
With the exception of the mounting configuration which will be covered later, each MDM model includes
the
MDM Flowmeter Head with one of the following:
Conventional Rubber Goods or N
2
O - O
2
Scavenger

40” Breathing Tube

Large scavenger

Large Nasal Inhaler

3 Liter breathing bag

3 Liter Breathing bag