LP/LD28 Series Product Manual
7
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Specification Conditions
Specifications Are Temperature Dependent
Catalog specifications are obtained and measured at 20°C. Specifications at any other temperature
may deviate from catalog specifications. Minimum to maximum continuous operating temperature
range (with NO guarantee of any specification except motion) of a standard unit before failure is 5°C to
40°C.
Specifications Are Mounting Surface Dependent
Catalog specifications are obtained and measured when the positioner is fully supported, bolted down,
and is mounted to a work surface that has a maximum flatness error of 0.13mm/300mm (0.005”/ft)
Specifications Are Point of Measurement Dependent
Catalog specifications and specifications in this manual are measured from the center of the carriage,
37.5mm above the carriage surface. All measurements taken at any other location may deviate from
these values.
