LP/LD28 Series Product Manual
25
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Step 11:
Install socket head cap screws and tighten.
Step 8:
IF REMOVING/INSTALLING NEMA 17 ADAPTER: Check that
wave spring, spacer, and torque disk are in place. If wave spring and
spacer need to be installed, be sure wave spring is inserted first.
Step 10:
Install motor onto unit making sure coupling hub engages
torque disk. Rotate motor into proper orientation. Note standard orien-
tation from factory is such that the motor leads or cable are toward limit/
home switches.
Step 9:
IF REMOVING/INSTALLING NEMA 17 ADAPTER: Install
adapter and socket head cap screws. Tighten screws evenly as wave
spring compresses.
Step 7:
IF INSTALLING NEW COUPLING HUB ON MOTOR SHAFT:
Tighten set screw.
