LP/LD28 Series Product Manual
23
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Step 6:
IF INSTALLING NEW COUPLING HUB ON MOTOR SHAFT:
Tighten set screw.
Step 7:
Check that wave spring, spacer, and torque disk are in place.
If wave spring and spacer need to be installed, be sure wave spring is
inserted first.
Step 9:
Install pan head screws and tighten evenly as wave spring
compresses.
Step 8:
Install motor onto unit making sure coupling hub engages
torque disk. Rotate motor into proper orientation. Note standard orien-
tation from factory is such that the motor leads or cable are toward limit/
home switches.
Step 5:
IF INSTALLING NEW COUPLING HUB ON MOTOR SHAFT:
Place coupling hub onto motor shaft. Align set screw with flat on shaft
and position hub so surface is flush with end of shaft as shown.
