Transportation, installation and storage
K-MT1-8_EN_08—2014
19
Transportation, installation and storage
Danger due to incorrect transportation!
The dryer must be transported by authorized and qualified specialist
personnel only. During transportation all applicable national regulations
for accident prevention must be complied with. Otherwise there is a risk
of personal injury.
Always adhere to the stickers and notes on the packaging of the dryer!
The manufacturer will not be liable for any damage caused by incorrect storage
or incorrect transportation. Please note therefore the following instructions as well
as the storage instructions on page 22.
Information on transportation packaging
Depending on the type of transportation, the dryer is delivered in different types
of packaging:
All transportation types: the apertures of the dryer are closed off by means of
plugs.
In addition, when transportation is effected by air: the dryer is packaged in a
wooden box.
In addition, when transportation is effected by ship: the dryer is packaged in a
film material and in a wooden box.
If the packaging is undamaged
►
The undamaged packaging should be removed only at the final installation
site, as it offers protection against any weather influences.
What to do in the case of transport damage occurring?
►
Check whether only the packaging or the dryer itself were damaged.
►
Inform the haulier immediately in writing of any damages.
►
Contact the manufacturer urgently in order to report the damage.
Warning!
A damaged dryer must not be taken into operation! Damaged components
may lead to functional faults and possibly cause further damage.
