8
WWW.PARKERMOTION.COM
PH: (724)
-
861
-
8200
HMR Series Positioners
5
Transportation and Storage
5.1
Transportation
The electric HMR linear drives are extremely precise products. Impacts could damage the mechanical system of the
drive, resulting in a negative influence on functionality.
To prevent damage during transportation, place the units in appropriate protective packaging.
Transport packed or unpacked HMR units using a crane or forklift
•
In storage and handling static deflection of the actuator should not exceed 0.1% of total length.
•
Larger deformations could result in a reduced service life, increased wear, and increased friction. These
must therefore be avoided!
•
Attach ropes as shown/use fork as shown.
5.2
Storage
The storage location must be:
•
Dry, free of dust and vibrations
•
On a flat surface.
Deflection of the HMR must be avoided!
•
Support the drive profile appropriately during transportation and handling.
WARNING
Lifted or suspended loads can tip over or crash down
This could result in severe injuries or damage to property.
►
Never walk under suspended loads.
►
Transport loads as close to the floor as possible.
►
Securely fasten the load for transportation and note the center or gravity
Caution
Heavy parts can slip during handling!
This could result in severe injuries or damage to property.
►
Hold parts or units securely.
►
Wear safety gloves.
►
Use tools and supports.
Attention
The profile may bend or snap!
►
Support the drive profile appropriately during transportation and handling
NOTE
Notify the shipping company and Parker
-
Hannifin or the
delivery company immediately, in writing, of any transportation
damage or missing parts.
