27
WWW.PARKERMOTION.COM
PH: (724)
-
861
-
8200
HMR Series Positioners
7.7.1
Using the Correct Drive System
The drive system consists of a motor and/or gearbox and is connected to the linear drive in order to move the carriage
Linearly along with the mounted payload.
To ensure that the linear drive is operated within the permissible load limits, the proper arrangement and selection of
the motor system must be carried out by Parker
-
Hannifin or the operator.
EL
-
sizing, the software
-
based design program from Parker
-
Hannifin, also provides reliable combinations of linear drive
and drive system. The maximum torque on the drive shaft of the linear drive must not be exceeded at any time.
7.7.2
Coupling Housing, Motor Coupling and Flange
The drive system, which consists of the motor and/or gearbox, must be properly connected to the drive shaft of the
linear drive. To ensure the shafts are aligned with one another, a tailored combination of a coupling housing, motor
coupling and motor flange (for externally supplied motors/gearboxes as well) must be fitted.
Therefore, it is best if you only use suitable products offered by the manufacturer.
WARNING
Hazard due to over
-
dimensioned drive system motor and gearbox
Severe injuries and damage to property that could even occur after longer periods of operation
Corrected dimensioning of the drive system and matching to linear drive is necessary
WARNING
Shaft breakage due to Non
-
alignment
Severe injuries and damage to property caused by unbraked payload.
Centering of drive shaft and motor shaft/gearbox shaft via coupling housing and flange
Connection dimensions belt drive
-
HMRB
Product
ØA
B
ØD
H7
E
ØF
H7
G
GV
HW
HMRS08
42
M4
34
2.5
10
13.5
2.5
25
HMRB11
51
M6
39.0
1.2
12
20
0.0
31
HMRB15
72
M8
54.0
2.1
15
19.3
7.0
45
HMRB18
80
M8
64
4.0
18
21.8
1.5
50
HMRB24
95
M10
80
2.5
24
24
4.0
60
Connection dimensions screw drive
-
HMRS
Product
ØA
B
ØD
H7
E
ØF
H7
G
HB
HR
Basic
Reinforced
HMRS08
42
M4
34
3.0
6
11
26
37.0
HMRS11
51
M6
39
5.0
10
18
32
52.0
HMRS15
72
M8
54
4.0
12
31
36
60.0
HMRS18
80
M8
64
2.5
15
33
44
67.5
HMRS24
95
M10
80
2.5
20
37
55
83.0
