Information on transportation packaging
16
HDK-CNG_EN_03_2016
Transportation, installation and storage
Danger due to incorrect transportation!
The dryer must be transported by authorised and qualified specialist
personnel only. During transportation all applicable national regulations
for accident prevention must be complied with. Otherwise there is a risk
of personal injury.
Risk of damage to the dryer when lifting!
The upper pipe bridge is not suitable to safely support the weight of the
dryer. The dryer could be damaged.
Always use eyebolts to lift up the dryer!
Only use suitable and technically perfect lifting gear with a sufficient carrying
capacity.
During transportation the dryer must be carefully secured against
falling over.
The manufacturer will not be liable for any damage caused by incorrect storage
or incorrect transportation. Please note therefore the following instructions as well
as the storage instructions on page 18.
Information on transportation packaging
Depending on the type of transportation, the dryer is delivered in different types
of packaging:
All transportation types: the apertures of the dryer are closed off by means of
plugs.
In addition, when transportation is effected by air: the dryer is packaged in a
wooden box.
In addition, when transportation is effected by ship: the dryer is packaged in a
film material and in a wooden box.
If the packaging is undamaged
► The undamaged packaging should be removed only at the final installation
site, as it offers protection against any weather influences.
What to do in the case of transport damage occurring?
► Check whether only the packaging or the dryer itself were damaged.
► When damage occurs, immediately contact the manufacturer to have the
problem examined. You will find the telephone number on page 8.
Attention!
A damaged dryer must not be taken into operation! Damaged components
may lead to functional faults and possibly cause further damage.