Parker Hannifin Corporation
– GS100 User Manual
5
1 Safety
Do not perform the procedures in this manual unless you are experienced in the handling of electronic
equipment.
Contact the manufacturer if there is anything you are not sure about or if you have any questions
regarding the product and its handling or maintenance.
The term "manufacturer" refers to Parker Hannifin Corporation.
Safety Symbols
The following symbols are used in this document to indicate potentially hazardous situations.
When you see these symbols, follow the instructions carefully and proceed with caution.
Danger! Risk of death or injury.
Warning! Risk of damage to equipment or degradation of signal.
General Safety Regulations
Work on the hydraulics control electronics may only be carried out by trained personnel who are
well-acquainted with the control system, the machine, and its safety regulations.
Follow the manufacturer's regulations when mounting, modifying, repairing, and maintaining
equipment. The manufacturer assumes no responsibility for any accidents caused by
incorrectly mounted or incorrectly maintained equipment. The manufacturer assumes no
responsibility for the system being incorrectly applied, or the system being programmed in a
manner that jeopardizes safety.
Do not use the product if electronic modules, cabling, or connectors are damaged or if the
control system shows error functions.
Electronic control systems in an inappropriate installation and in combination with strong
electromagnetic interference fields can, in extreme cases, cause an unintentional change of
speed of the output function
This product can expose you to chemicals including
ANTIMONY TRIOXIDE,CARBON
BLACK (AIRBORNE, UNBOUND PARTICLES OF RESPIRABLE SIZE)
which is known to
the State of California to cause cancer and
4,4'-(PROPANE-2,2-DIYL)DIPHENOL, BPA,
P,P'-ISOPROPYLIDENEBISPHENOL,
which is known to the State of California to cause
birth defects or other reproductive harm. For more information go
to
