7
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series F11
Bulletin HY30-5503-M1/UK
Assembling
1. Place the ring gear on the shaft
with the guide pin located against the
guide hole.
2. Press down the big tapered roller
bearing together with the ring gear.
3. Place the distance ring on the big
tapered roller bearing.
4. Place the small tapered roller bear-
ing on the shaft as on the picture.
5. Press down the small tapered roller
bearing in small steps until correct
preload is achived. Not to tight and no
backlash.
6. Place the lock washer(s) on to the
shaft.
