10
Parker Hannifin
Pump and Motor Division
Trollhättan, Sweden
Service Manual
Series F11
Bulletin HY30-5503-M1/UK
Assembling
19. Carefully push down the shaft
seal.
20. Place the support ring with the
radius agains the dust lip on the shaft
seal.
21. Carefully tap down shaft seal and
support ring.
22. Assemble the retaining ring.
23. Assemble the hexagon screws
and torque them to specified value,
shown on page 12.
24. Tap down the flat key and turn the
shaft at least one revolution. Make
sure the back-lash of the gears are
correct (see page 12).
