Parker EX Series Скачать руководство пользователя | Manualshive

Страница: 24 / 133

background image

24

– Pvd3665_Gb_Ex_August 2022

1.

INTRODUCTION

1.1. Purpose and intended audience

This  manual  contains  information  that  must  be  observed  to  select,  install,  operate  and
maintain PARKER EX servomotors.

Installation, operation and maintenance of the equipment should be carried out by qualified
personnel. A qualified person is someone who is technically competent and familiar with all
safety information and established safety practices; with the installation process, operation
and maintenance of this equipment; and with all the hazards involved.

Reading and understanding the information described in this document is mandatory before
carrying out any operation on the motors. If any malfunction or technical problem occurs,
that has not been dealt with in this manual, please contact PARKER for technical assistance.
In  case  of  missing  information  or  doubts  regarding  the  installation  procedures,  safety
instructions or any other issue tackled in this manual, please contact PARKER as well.

PARKER

’s responsibility is limited to its servomotors and does not encompass the whole

user’s system. Data provided in this manual are for product description only and may not be
guaranteed, unless expressly mentioned in a contract.

DANGER: PARKER declines responsibility for any accident or material
damage that may arise, if the procedures and safety instructions
described in this manual are not scrupulously followed.

Motors for ATEX zones : Servomotors type EX manufactured for the
European market are designed to operate in ATEX classified zones

Motors for hazardous classified locations : EX servomotors
manufactured for the North American market are designed to operate
in harzardous classified areas.

Motors for Ex zones : Servomotors type EX manufactured off
European and North American markets are designed to operate in Ex
classified zones.

«
...
22
23
24
25
26
...
»

Содержание EX Series






































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX Series

Бренд: Hatz Diesel Страницы: 48

HP525 EFI Bravo Sterndrive Series

Бренд: Mercury Racing Страницы: 147

Бренд: M.T.H. Страницы: 26

NIIGATA MG(L)26HLX

Бренд: IHI Страницы: 204

Бренд: Raider Страницы: 28

Бренд: O.S. Speed Страницы: 4

Бренд: Grundfos Страницы: 12

Nitro Star T-15

Бренд: HPI Racing Страницы: 4

Бренд: Briggs & Stratton Страницы: 20

Power 60 Brushless Outrunner

Бренд: E-FLITE Страницы: 4

Бренд: Akribis Страницы: 86

Бренд: 3W Страницы: 20

Бренд: Tanaka Страницы: 4

Бренд: Baldor Страницы: 40

Бренд: OLI Страницы: 44

Бренд: CAME Страницы: 16

Бренд: 3W Страницы: 18

Бренд: Altronic Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды