Parker EAPF 1, Инструкции по установке, эксплуатации и обслуживанию

Страница: 10 / 26

10(26) Hydraulic Oil Filter
EAPF 1
Operation and Maintenance Instructions
72.09.195.66 rev.B

Parker Hannifin Manufacturing Netherlands (Filtration) B.V.
7. INSTALLING AND COMMISSIONING
Before installation, make sure that all components are in proper
condition and that all required parts are at the installation site.
7.1. Transporting and storing
Follow these guidelines for transporting and storing:
•
Keep the device away from excessive temperature variations and corrosive
chemicals.
•
Keep the device and accessories dry.
•
The device must be kept safe from mechanical effects, such as hits and excessive
static loads. Their transport must be performed without deforming or damaging the
device or its packaging.
•
When transported the device/packaging must be secured in a fixed position and
should not be transported together with sharp objects.
7.2. Precautions
When installing the system, pay special attention to the following:
•
Installation base shall be level and even.
•
Supporting bracket or piping may not cause any stresses on the filter (twisting,
pulling, etc.).
•
Sufficient space is available for installation work (Cf. Installation Drawing).
•
All screws and connections are properly tightened according to manufacturer’s
specifications.
•
If filtered fluid has high viscosity, provide the filter with thermal insulation and use
extraheating for the fluid as necessary (consult manufacturer).