Parker BD-E Series, Руководство пользователя

Страница: 24 / 48

18 BD SERVO DRIVES USER GUIDE
Extending the motor and encoder leads
Unless the use of bulkhead connectors is unavoidable, it is preferable to make up entirely new
leads rather than to extend the cables supplied, but the same connector types must be used and
screens must be correctly terminated. The following cable types may be used for this purpose:
Motor cable Lapp LiYCY 0034804
Encoder cable Lapp LiYCY 0035805
Connection details will be found in Tables 3-2 to 3-3. When making up new cables, make a
careful note of how the original cable is terminated and ensure that the new cables are arranged
in exactly the same way. Remember that the ferrite absorber must be fitted on the encoder
cable close to the drive. Note that the encoder cable is slightly longer than the motor cable to
allow for the different connector locations at the drive end. Please consult Digiplan if you
propose to extend the motor and feedback leads beyond 30 metres.