Parker Airtek SMART CYCLE PLUS 100, Руководство оператора

Страница: 13 / 45

- 13 -
DP5550 Displays
Power On Screen – Displayed for 3 seconds after power-on or reset

Model and Size

Firmware Rev/Date
Main Display - System OFF
Main Display - System Running, No Alarms
Press the RUN SELECT key to cycle thru the operating modes

Operating Mode

Operating Dew Point
Operating
Modes
“SYSTEM OFF”
“AUTO MODE (L)” (L) = load/Unload Mode,
(C) = Cycling Mode
“LOAD/UNLOAD MODE”
“CYCLING MODE”
Main Display - System Running, with Warning Alarms

Alarm Description(s)

Operating Dew Point
Warning
Alarms
"HIGH DEW POINT"
"DRAIN FAULT"
"HIGH CONDENSER TEMP."
"HIGH INLET TEMP"
"HIGH DIFF PRESSURE"
"BAD SENSOR WARNING"
"CHANGE FILTER"
Note: if more than one alarm condition exists, then the top line of the display will automatically cycle
thru all active alarms.
[4] 1500-3000 CFM
1.0.4.9x/Dec 1 2009
SYSTEM OFF
Press Run Select
AUTO MODE (L)
DEW POINT:36°F
HIGH INLET TEMP
DEW POINT:36°F