Parker Airtek SMART CYCLE PLUS 100, Руководство оператора, Страница: 10 / 45

- 10 -
Section 4.0 - Controls
REFRIGERANT DRYER CONTROLLER
FEATURES AND OPERATIONS
(1) – RUN SELECT KEY: (MODE SELECTOR)
Push Key to toggle through the four modes of operation (‘ AUTO ’ Run Mode, ‘ LOAD/UNLOAD ’ Mode,
‘ CYCLING ’ Mode, and ‘ OFF ’). The Display ‘main screen’ will indicate all modes of operation along with the
current Dew Point measurement.
(2) – ALARM KEY: (RESET ALARMS)
When the ALARM Key red ‘LED’ is flashing, the system has experienced an alarm event. The Display will
indicate all alarms when they occur. Pushing the ALARM Key will attempt to clear the fault. Note with some
alarms, the system will need to be restarted.
(3) – DRAIN KEY: (OPERATE DRAIN)
When the ‘DRAIN’ Key is pressed, the drain solenoids will operate for the programmed time duration. (see
Settings, Drains). The green LED will illuminate indicating the drains are open.
(4) – LOAD KEY: (VIEW LOAD %)
Pushing the ‘LOAD’ Key will toggle the Display between indicating ‘Mode & Dew Point’ (standard), and,
‘Percent of Load’ (optionally) that the dryer is experiencing. The green LED will illuminate indicating the
display option is active.