Parker 8903/DN, Техническое руководство

Страница: 14 / 36

8
DeviceNet Communications Interface
Drive Diagnostics
The DeviceNet MMI View
The following DeviceNet diagnostic parameters can be displayed on the MMI.
Parameter Descriptions
BAUDRATE Read only Range: Enumerated - see below
The Baudrate set by either the DIP switches 7 and 8 on the front of the DeviceNet Option or set
by the DNET block in the DSE configuration.
Enumerated Value : BAUDRATE
0 : 125 KBaud
1 : 250 KBaud
2 : 500 KBaud
MAC ID Read only Range: 1 - 63
The DeviceNet node address set by DIP switches 1 to 6 on the front of the DeviceNet Option
or set by the DNET block in the DSE configuration.
Note – if the MAC ID is zero, the connection to the network is disabled.
CONNECTION STATE Read only Range: Enumerated - see below
The state of the network connection.
Enumerated Value : CONNECTION STATE
0 : NON EXISTENT
1 : SELF TESTING
2 : STANDBY
3 : OPERATIONAL
4 : RECOVER FAULT - recoverable fault
5 : UNRECOVER FAULT - unrecoverable fault
DEVICE STATUS Read only Range: Enumerated - see below
The state of the DeviceNet Option.
Enumerated Value: DEVICE STATUS
0 : NO ERROR
1 : OWNED
2 : CONFIGURED
3 : MINOR REC FAULT - minor recoverable fault
4 : MINOR UNREC FLT - minor unrecoverable fault
5 : MAJOR REC FAULT - major recoverable fault
6 : MAJOR UNREC FLT - major unrecoverable fault