Parker 6053-LINK-00 TechBox, Руководство по эксплуатации продукта

Страница: 20 / 46

15
LINK TechBox/TechCard Instruction Manual - HA470016 Issue 5
Chapter 5 - Sample Projects
To demonstrate the use of a LINK Technology Option, here are two simple projects consisting of a
584SV drive, with a LA463610U003 TechCard, or 690+ drive with a 6053/6055 TechBox and an
L5392 touchscreen. Our first example uses a 584SV, the second example uses a 690+. By
configuring these pieces, we will build a
LINK project that will :
•
Start, stop and jog the drive from the touchscreen
•
Display health status and trips
•
Set line speed
•
Monitor motor speed, frequency, voltage and current
Step 1 – Plan the project
Before any configurations are done, make list of parameters that need to be accessed in the drive.
Go to the “Specification Table – Tag Number Order” section in the drive instruction manual to
identify all tags. For this example they are:
TAG R / W Description Type Scaling
291 Write Start Command Ordinal -
277 Write Fast Stop Ordinal -
278 Write Coast Stop Ordinal -
294 Write Reverse Direction Ordinal -
280 Write Jog Command Ordinal -
130 Write Speed Setpoint Value 1 = 120%
592 Read Motor Volts Ordinal -
70 Read Motor Load Value 200% = 1
255 Read Speed Feedback Value 120% = 1
6 Read Drive Status Ordinal -
591 Read Output Frequency Ordinal -
52 Read Drive Healthy Ordinal -
285 Read Drive Running Ordinal -
Step 2 – Configure the Drive
584SV/605
Using the drive MMI, preferably ConfigEd Lite, configure the drive as shown in Figure 2. These
instructions will also apply to the 690+ if using ConfigEd. The changes from default are
:
•
Drive Start Command goes to Sequencing Logic\Run Fwd. (Break the default connection
to Run Fwd).
•
Break all input connections to Value Function 1. (Speed Reference goes to Value Function
1\Input A).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com