Parker 1P1V-S020A00005 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 68

background image

44

Drilling, milling and grinding motors

P1V-S

Drilling, milling and grinding motors

A large number of drilling motors, milling motors and grinding motors
have been developed using the P1V-S as the base motor in order
to make it easier to install air motors in machining applications.
These motors are all equipped with standard vanes for intermittent
lubrication-free operation, although it is recommended to use oil mist if
you are planning to operate them for extended periods.

NOTE! These motors are not made of 100% stainless steel.

Drilling motors are available with power ratings of 80, 170, 50 and
400 Watts, and several different speeds for the machining of a range
of materials. They can be fitted with collet chucks, drill chucks and
quick-release chucks. Many of them also have accessories allowing
the exhaust air to be removed.

The milling motor, with a power rating of 400 Watts, runs at a relatively
high speed, and is fitted with a collet chuck for a shaft diameter of 8
mm. It is equipped with strong bearings able to handle greater shear
forces on the spindle.

The grinding motor, with a power rating of 00 Watts, is fitted with a
collet chuck for a shaft diameter of 8 mm and runs at a relatively high
speed. It is equipped with strong bearings able to handle greater
shear forces on the spindle.

The design principle of the 90 Watt grinding motor is different from
the others. The turbine principle means that high speeds are possible
without the need for lubrication.

Feed movement in drilling, milling and
grinding motors

A slow and even feed movement is necessary in machining
applications. During drilling, the feed must not uncontrollably speed
up once the drill breaks through the material. One good way of solving
the problem is to use a pneumatic cylinder for the feed, which is able
to provide force during drilling and a rapid approach before the actual
drilling phase. Feed during the drilling phase is controlled using a
hydraulic brake cylinder (HYDROCHECK) fitted in parallel with the
pneumatic cylinder. This provides even, slow and safe feed movement,
without the risk of the uncontrolled feed described above.

Technical data:

Working pressure:

Max 7 bar

Working temperature:

-30 °C to +100 °C

Medium:

40 µm filtered oil mist

(unlubricated for grinding motor P1V-S009)

Other technical data
See table for each motor

Material specification

Drilling motors P1V-S008N, P1V-S05N/M, P1V-S040M,
milling motor P1V-S040N and grinding motor P1V-S00N
Housing

Stainless steel, X1Cr13

Shaft, collet chuck

Hardened steel (not stainless)

Shaft for drill chuck

Hardened and tempered steel

(not stainless)

Drilling motors P1V-S017N/M and
grinding motor P1V-S009N
Housing

High grade steel (not stainless)

Shaft, collet chuck

Hardened steel (not stainless)

Shaft for drill chuck

Hardened and tempered steel

(not stainless)

All
Internal parts

High grade steel (not stainless)

Accessories

Surface treated steel, plastic

aluminium

P 1 V - S

0 1 7

N

0

Q 0 0

Order key

Possible combinations

Please refer to pages 45 to 5.

Function

M

B10/B1 shaft

N

Collet chuck

Motor size

008

80 W

009

90 W

017

170 W

025

50 W

030

300 W

040

400 W

Free speed
per min

035

350

999

9990

A00

10000

H00

17000

L00

0000

Q00

4000

X00

30000

A000

100000

Air motor range

P1V-S

Drilling, milling and grinding motors

«
...
42
43
44
45
46
...
»

Содержание 1P1V-S020A00005





































































Отзывы:

Нет отзывов

Похожие инструкции для 1P1V-S020A00005

Бренд: ZIEHL-ABEGG Страницы: 84

Бренд: Schweigen Страницы: 28

Бренд: 3W Страницы: 20

Sonesse Ultra 50 DC RS485

Бренд: SOMFY Страницы: 16

MaxxForce DT 10

Бренд: Navistar Страницы: 109

Бренд: Saito Страницы: 2

Бренд: Hoval Страницы: 12

Бренд: Briggs & Stratton Страницы: 200

Бренд: Leadshine Technology Страницы: 55

Gasoline V6 90 Degree

Бренд: GMC Страницы: 94

Бренд: Lycoming Страницы: 194

Бренд: Louvolite Страницы: 4

Бренд: MULTIPLEX modell Страницы: 11

Бренд: Pratt & Whitney Canada Страницы: 48

Бренд: AUSTRALIAN MADE Страницы: 20

Бренд: O.S. engine Страницы: 2

Бренд: O.S. engine Страницы: 4

Бренд: O.S. engine Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды