Parker 10P-0008 PROFIBUS DP, Руководство по эксплуатации продукта

Страница: 9 / 29

7
Table 4-3
Function code Function definition Setting value
F200 Source of start command 3:Modbus 4:Keypad
＋
TeModbus
F201 Source of stop command 3:Modbus 4:Keypad
＋
TeModbus
F203 Main frequency source X 10: Modbus
F900 Communication Address 1
F901 Communication Mode 2:RTU
F902 Stop bits 2
F903 Parity Check 0: Invalid
F904 Baud Rate 6:57600
4.3 Profibus communication address setting
There are two Hex rotary selectors on the outer shell of communication card (please refer to Fig 4-
1), they are used to set the address of Profibus-DP slave, the valid address range is 0x01-0x7D, the
decimal range is 1-125, the other address is invalid.
Fig 4-1 Address setting selectors
4.4 PPO type or periodic data format
The Profibus DP protocol uses so-called PPOs
（
Parameter/Process Data Object
）
in cyclic
communication. PPO type data format include two parts, PKW (parameter section) and PZD
(process data section).
ADDH
ADDL