HDK-MT350_EN_06
9
For your own safety
The dryer has been built in accordance with the state of the art and the
recognized technical safety regulations. Nevertheless, there is a risk of personal
injury and damage to property when the dryer is used, if
it is operated by non-qualified personnel,
not used within its intended design specifications,
is repaired or maintained incorrectly.
Note:
For your own safety and to prevent machine damage, please note the
information and safety notes in these operating instructions when
working with the dryer.
Intended use of the dryer
The dryer is solely intended for the purpose of drying compressed air and
nitrogen (gaseous) in accordance with the Pressure Equipment Directive.
Consultation with the manufacturer is required if the dryer is to be used in
connection with other gases of fluid group 2.
Depending on defined conditions, it dries compressed air for industrial use. The
compressed air must be free of aggressive water, oil and solid constituents.
Refer to
on Page 66 for information on the defined conditions.
The dryer may only be operated in discontinuous operating mode when a start-up
facility (pressure retention valve) is installed.
The dryer may be operated only in accordance with the data on the type plate
and in accordance with the contractual conditions. Non-observance of the data
given there is regarded as improper use.
Suspected misuse
In accordance with the Pressure Equipment Directive (PED), the dryer must not
be used to dry potentially explosive, combustible or toxic gases of fluid group 1.
The dryer must not be misused as a climbing aid! Pipes, valves, and similar
fittings have not been designed for such loads. They could fracture, tear off, or
become damaged in another way.
Changes to the pressure vessels are not permitted.
