EN
| User Manual
Maintenance and repair of the dryer
34
BSP-MT 10-95/D3
Regular maintenance intervals
Note:
If a chamber has been depressurised, e.g. after completion of the ex-pansion
phase, and the pressure remains above 0 bar, the chamber is pressurised by
what is known as ram pressure. This might be due to
◊ blockage at the muffl er(s)
◊ contamination of the perforated plates
◊ spent drying agent
To prevent such malfunctions, regularly service the dryer as described below.
The table provides an overview of the maintenance work to be carried out. The following
pages describe some of these tasks. Maintenance work requiring the dryer to be largely
disassembled is not described. We recommend to have this work to be performed by author-
ised specialists.
Component
Maintenance task to be carried out
Maintenance
interval
daily
12 months
24 months
See page
Complete dryer
Carry out visual checks and function checks.
•
36
Vessel pressure gauge Check dam pressure. For a dam pressure exceeding
0.3 bar:
– Check muffl er.
– Check dust sieve.
– Check drying agent.
•
36
Air quality
Must be check.
•
37
muffl er
Replace muffl er after 1 year of operation and after
renewing the dessicant.
•
37
fi ne fi lter
muffl er-dämpfer
Replace silencer element annually and after each
desiccant change.
•
37
Dew point sensor
(with optional dew
point sensing-control)
Renew
•
38
Purifying agent
Renew.
If the fed compressed air is humid, the maintenance
interval is reduced to 6 months
•
39
drying agent
Renew
•
39
Pilot valves
Renew
•
39
Main valves V1/V2
Renew
•
39
Expansion valves
V3/V4
Renew
•
39
Check valves V5/V6
Renew
•
39
Solenoids
Renew
•
39
Содержание BSP-MT 10-95/D3
