![background image](http://html1.mh-extra.com/html/park-warehouse/622pg175/622pg175_manual_3691752019.webp)
21
FOOTING DETAIL - ONGROUND
2
1
3
4
2
5
1
CM
0
INCH
0
10
9
6
11
14
8
15
7
12
13
4
3
6
5
1. Attach Upright Post to Footbuck Ass'y using M10 x 50mm B.H.C.S. and M10 T-Nut. Be sure to use the top two holes in Footbuck Ass'y.
See Detail 009. Peen T-Nut using hammer to conform around Upright Post.
2. Attach Platform Mounting Bracket to Platform Onground Bracket using M10 x 35mm B.H.C.S. and M10 Lock Nut. See Detail 010.
3. Continue assembling unit. Refer to pages 24 to 35.
4. With Footbuck Ass'ys and Platform Onground Bracket in position, secure each Footbuck Ass'y and Platform Onground Bracket to the
ground using Ground Spikes. NOTE: A 4lb. hammer may be required to drive spikes into the ground. Install ground spikes angled
inward as shown in illustration. See Detail 008.
IMPORTANT:
Refer to Post Placement/Hole Locations diagram to mark locations of
Footbuck Ass'ys and Platform Onground Bracket.
008
FOOTBUCK
ASS'Y
GROUND SPIKE
(02-08-0125)
010
PLATFORM MOUNTING
BRACKET
PLATFORM ONGROUND
BRACKET
M10 x 35mm (1 3/8")
BHCS BOLT
(33-11-0005)
M10 LOCK NUT
(33-11-0400)
009
M10 x 50mm (2")
BHCS BOLT
(33-11-0010)
UPRIGHT
POST
FOOTBUCK
ASS'Y
M10 T-NUT
(33-11-0402)
Peen T-Nut using a hammer
after tightened to conform
around Upright Post.
Содержание 622pg175
Страница 1: ...1 Super Roof without Sprout SKU 175 622pg...
Страница 6: ...Manufacture recommends the following maintenance procedures be followed...
Страница 7: ......
Страница 12: ...TOOLS REQUIRED 14...