Park Air Systems T6T Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 118

background image

T6T VHF 100 W Transmitter

Page 23

Maintenance

Back to Transmitter
Main Page

Installing the VFP Software

The VFP software is supplied by Park Air on CD-ROM. The software can be run from the Main page or
installed on your PC via Explorer.

To install the software onto your PC:

(1)

Using explorer, display the contents of the CD-ROM supplied by Park Air. Identify the file named
S0473Vxx.EXE (where xx is the version number).

(2)

Using the mouse, right click on the file and then select Copy.

(3)

Display the Windows desktop. Right click anywhere on the desktop and select Paste.

(4)

Check that the VFP icon is shown on the desktop. Reposition the icon as required. The VFP
application is now installed on the PC’s desktop.

VFP Icon

VFP Features

The VFP screen is divided into four main windows: Settings, Channels, BIT and Status Information. Four
colours are used to display text. The colours have the following meanings:

❑

Black indicates a valid parameter that has been accepted by the radio.

❑

Red indicates an invalid parameter that has been rejected by the radio, or a BIT failure.

❑

Green indicates text that has not yet been downloaded to the radio. Text loaded into the VFP from
a previously stored file, or any text that is manually amended is green until it is downloaded into
the radio; after being downloaded into the radio the text changes to black, or if it is invalid, to red.

❑

Blue indicates Help text and is shown in the Status Information window.

The Menu Bar
The menu bar has four categories: File, Serial Port, Radio and Help.

File

Has the sub-categories: Open, Save and Print. These sub-categories allow the user to
open previously saved profiles, save a new profile, or print a profile.

A special sub-category: File > Save > Diagnostics should only be used when advised by
Park Air.

Serial Port

Has the sub-categories: Com 1 and Com 2. Before the VFP can be used, the appropriate
Com 1 or Com 2 must be selected to correspond with the PC’s Com Port used for the
radio connection.

Radio

Has the sub-categories: Retrieve, Send, Calibrate and Test.

This category allows a radio’s profile to be loaded into the VFP, allows a profile to be
downloaded from the VFP to a radio, calibrates a radio and initiates a BIT test.

Help

Provides detail about the VFP software.

«
...
99
100
101
102
103
...
»

Содержание T6T























































































































Отзывы:

Нет отзывов

Похожие инструкции для T6T

Бренд: Samyung ENC Страницы: 64

Бренд: Icom Страницы: 16

Бренд: GUILCOR Страницы: 7

Бренд: Omega Engineering Страницы: 8

Бренд: M-system Страницы: 5

Бренд: OrangeRx Страницы: 24

DTC 2-420-24U-FL

Бренд: NK TECHNOLOGIES Страницы: 2

Бренд: FeinTech Страницы: 10

EPSW-TS-RTD-6P-R1

Бренд: Larson Electronics Страницы: 5

Бренд: Austdac Страницы: 30

Бренд: Microtronics Страницы: 46

Бренд: Icom Страницы: 24

Бренд: IFM Страницы: 5

Бренд: Salcom Страницы: 4

Бренд: Sailor Страницы: 2

Бренд: Shearwater Страницы: 19

Бренд: Lectrosonics Страницы: 16

Бренд: Lectrosonics Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды