4.6 Care of the connection tubing
Dry the connection tubing after every inhalation session:
• Connect the connection tubing to the compressor.
• Switch your compressor on.
• Let the compressor continue to run until all the moisture in
the tube has been removed.
4.7 Inspecting
Inspect all product components after each cleaning and disin-
fection. Replace any broken, deformed or seriously discoloured
parts.
4.8 Drying
After each cleaning and disinfection, place all components on a
dry, clean and absorbent surface, and let them dry completely.
4.9 Storage
Store this product as described below:
• Wrap all individual components in a clean, lint-free cloth
(e.g. a tea towel).
• Store all individual components in a dry, dust-free place.
– 27 –
