background image

Gener

al

Information

Pr

epar
e

Oper
ate

Help

Technology

Performance description

30

4. 

Performance description

3.1.3 

Notes on transport

CAUTION

Material damage

 to the electric wheelchair through slipping from ramps or lift while being loaded. 

Material damage

 to the electric wheelchair through being secured and transported improperly in and elec-

tric wheelchair transporter. 

 

>

Secure ramp from slippage. 

 

>

Both the ramp and the electric wheelchair transporter must be positioned on even and firm surfaces. 

 

>

The ramp or lift must be clean and dry. 

 

>

The ramp must be wider than the electric wheelchair and should be clearly visible to allow corrective 

steering. 

 

>

Mount the ramp and lift in a single movement in order to prevent the electric wheelchair rolling back-

wards. 

 

>

Secure the electric wheelchair in the transporter according to the usual legal regulations. 

 

>

Use only suitable and authorised securing equipment. 

 

>

Switch the electric wheelchair off during transport. 

National regulations may prevent you from taking it on buses, trains and air transport.

 

)

Ask your transport company about possible restrictions.

 

)

Before travelling by air, clarify the specific transport conditions with your airline as well as the legal 

 

regulations applicable in your country of origin or at your destination with regard to air transport.

Содержание PR 35





































































































































































Отзывы: