Customer Guide
HPAC Cell Cleaning
©2015 Parata Systems, LLC
page 38 of 40
Parata Technical Assistance Center
120-0465 Rev 03
1-888-PARATA1 (727-2821)
4.5
On the side toward you, lift the door arm and insert the pin at the end of the arm
into the hole in the tube rail. The pin in the center of the arm will fit into the slot
on the dispense chute.
Step 4.5
4.6
On the opposite side of the assembly, lift the door arm and insert the pin at the
end of the arm into the hole in the tube rail. The pin in the center of the arm will
fit into the slot on the dispense chute.
4.7
Set the chute aside and return to step 5.6 “Install the clean chute assembly.” on
page 23.
