OPERATING YOUR P 3 continued
Selecting the Input Source
You can select the input source by repeatedly pressing the
Source
button on the front
panel until the desired source name appears in the status display. You can also select
the desired source directly with the
Source
select buttons on the remote control.
The
Source
buttons on the remote control correspond to the following:
Remote Control Button Input
Direct 1
Direct 2
Aux (line or phono selected at rear panel)
Tuner
CD
Tape
Selecting the Input Source on the P 3
Press the front panel
Source
button until the desired input source is selected. You can
also press the
Source
buttons on the remote control.
Adjusting the Balance Level
You can adjust the balance of the P 3 with the <
Balance
> buttons on the front panel.
Each press of a button in either direction increases the relative balance in 2 dB increments
Adjusting Balance toward the Right Channel
Press the
Balance
> button once to show the present balance level in the display.
The next time you press the
Balance
> button it will change the balance.
Keep pressing the
Balance
> button until the desired balance is reached. Each time
you press the
Balance
> button, the right channel level will increase by 2 dB.
Adjusting Balance toward the Left Channel
Press the <
Balance
button once to show the present balance level in the display.
The next time you press the <
Balance
button it will change the balance.
Keep pressing the <
Balance
button until the desired balance is reached. Each time
you press the <
Balance
button, the left channel level will increase by 2 dB.
17
1
2
3
4
5
6
1
1
2
3
4
5
6
See page 19 for P 3 Front Panel and Remote Control layout
Содержание Halo P 3
Страница 1: ...P 3 Preamplifier Owner s Guide...
