24
Mute Indicator
This indicator lights when the Mute button is engaged from the remote control. This LED
also lights when the remote zone is on while the main zone is off.
Digital and Analog Input Indicators
These indicators illuminate when the corresponding digital (Optical 1-2, Coax 1-2) or Analog
input is selected with the Digital button.
DTS Indicator
This indicator illuminates when the AVC-1800 has detected a DTS bitstream.
Dolby Digital Indicator
The Dolby Digital indicator illuminates when the AVC-1800 has detected a Dolby Digital
bitstream.
Center Delay Button
Press this button to select delay time for the center channel speaker. Each press of this
button increases delay from one mS to a maximum of five mS.
Tone Button
This button activates the bass and treble controls. The
TONE
indicator illuminates when the
tone controls are active.
Re-EQ Button
Press the Re-EQ button to engage Lucasfilm Re-Equalization. Press it again to turn it off.
Digital Button
The Digital button selects the four digital inputs or the analog input. When you select a
digital input to accompany one of the input sources, the AVC-1800 will recall that digital
input the next time you select the input source thereby linking them together.
Surround Button
By pressing the Surround button, you can select between 5.1, Pro Logic, and two channel.
Selecting the two-channel surround mode will downmix a 5.1 channel signal.
5.1 Analog Indicator
This LED lights when you select the 5.1 analog input from the remote control.
Zone Indicators
When the remote zone is on, the Active LED lights. The
ZONE
LED lights for 5 seconds after
a remote zone command is issued.