Paramount Fitness PH-T-107-SS, Руководство пользователя

Страница: 9 / 14

1. Make 2-3 oz. of leak test solution
detergent and three parts water).
2. Apply several drops of solution
where hose attaches to regulator.
3. Apply several drops of solution
where regulator connects to cylinder.
4. Make sure all patio heater valves are OFF.
5. Turn cylinder valve ON.
Turn cylinder valve OFF.
If leak is detected at hose/regulator connection, tighten connection and
perform another leak test. If bubbles continue to appear, call customer
service at customercare@jrhome.com or (800) 561-5550, Monday to Friday,
7:30 a.m.-4:00p.m. PT
If leak is detected at regulator/cylinder valve connection, disconnect,
reconnect, and perform another leak test. If you continue to see bubbles
after several attempts, cylinder valve is defective. Contact customer service
Note:
Whenever gas connections are loosened or removed, you must perform a
complete leak test.
Perform all leak tests outdoors.
NEVER leak test when smoking
Do not use heater until all connections
have been leak tested and show no signs
of leakage.
Your heater was designed and
approved for
. Do NOT use it inside a
building, garage, or any other
enclosed area.
Make sure surrounding areas are
free of combustible materials,
Ensure that there is no
obstruction to air ventilation. Be
sure all gas connections are tight
and there are no leaks.
Be sure the cylinder is clear of
debris. Be sure any component
removed during assembly or
servicing is replaced and
fastened prior to starting.
Heater should be thoroughly
inspected before each use, and
at
least annually. If re-lighting a
hot heater, always wait at least
5 minutes.
Inspect the hose assembly for
evidence of excessive abrasion,
cuts, or wear. Suspected areas
should be leak tested. If the
hose leaks, it must be replaced
prior to operation. Only use the
replacement hose assembly
OPERATING INSTRUCTIONS
valve is defective. Email us at customercare@jrhome.com or (800) 561-5550,
Monday to Friday, 7:30 a.m.-4:00p.m. PT