Step 6: Note the orientation of the top bracket to the heater head. Insert and tighten four large screws, items 11.
Step 7: Release the adjustable tubes clamps and slide the upper straight tube, item 5 through the adjustable tubes,
item 6, narrow end first. Thread the power cord through the tubes.
Step 8: Align the small end of the upper straight tube, item 5 with the screw hole in the curved top tube, item 4. Insert
and tighten a large screw, item 11.
Step 9: Thread the power cord through the lower straight tube, item 7, passing it out through the hole in the side of the
tube. Align the small end of the lower straight tube, item 7 with the screw holes in the adjustable tubes, item 6. Insert
and tighten four large screws, items 11.
8