TROUBLESHOOTING
In the unlikely event that the heater fails to operate, check the following:-
Problem
Probable Cause
Solution
Heating tube
will not light
No power.
Check the power plug connection with the power outlet.
Tilt switch knob set to “OFF”.
Set tilt switch knob
to “ON”
Non-self-resetting thermal fuse blown.
Refer to service agent for repair.
Heating tube is damaged.
Replace with new heating tube.
Tilt-switch activated.
Keep body vertical.
Tilt-switch is damaged.
Replace new tilt-switch.
Loose power connection.
Check and tighten power connections.
Heating
element glows
unevenly from
end to end
Heater head is not level.
Adjust the position of the heater or the head to achieve
level mounting.
HEATER TUBE REPLACEMENT
1. Remove power cord from power socket to ensure heater has no power connection.
2. Use screw driver to take off Heater head assembly side covers (See diagram 1 below)
3. Remove side covers and grille protector. (See diagram 2 below)
4. Remove tube from both terminals on each side. (See diagram 3 below)
5. Insert new tube into clipper and plug in both terminals. Make sure there are no metal parts around or touching
the heating tube.
6. Refit the grille and both side covers.
7. Replace power cord plug into the power socket and turn power on to check the new replaced heating tube.
8. Store in a safe
place where the unit won’t get damaged or broken.
9. Dispose of the defective heater tube properly.
11
