HAVE HEATER INSPECTED IF ……..
●
You smell gas combined with yellow tipped flames on burner.
●
Heater does not provide expected heat capacity.
●
Burner makes little explosion sounds while operating.
This sound is normal when turning off the heater.
PRECAUTIONS
●
Verify periodically for leaks in the system, or immediately when you smell gas.
●
In case a leak is detected, put out all open flame in the area.
●
Never leak test while smoking.
●
If you cannot repair a leak, turn off gas supply at the cylinder valve and contact a qualified technician.
●
Do not alter or modify in any way.
●
The installation of this appliance should be done by a certified gas technician inaccordance with all local, building and
municipal codes.
FOR YOUR SAFETY
Be careful when attempting to manually
ignite this heater. Holding in the control
knob for more than 10 seconds before
igniting the gas may cause a ball of flame
upon ignition.
FOR YOUR SAFETY
Heater will be hot after use. Handle with
extreme care.
When heater is ON:
Emitter screen will become bright red due to intense heat. The color is more visible at
night. Burner will display tongues of blue and yellow flame. These flames should not be
yellow or produce thick black smoke, indicating an obstruction of airflow through the
burners. The flame should be blue with straight yellow tops. If excessive yellow flame is
detected, turn off heater and consult "Troubleshooting" on page 14.
OPERATIONS
12