OPERATING INSTRUCTIONS
adjustment of
gas. Storage of an appliance indoors is permissible only if the
is disconnected and removed from the appliance. A
must be
stored outdoors in a well-ventilated area out of the reach of children. A
disconnected
must have dust caps tightly installed and must not
be stored in a building, garage, or any other enclosed area. The minimum
a heater for automatic operation rating less than full input rating.
The pressure regulator and hose assembly
with the appliance must be
.
The installation must conform with local codes, or in the absence of local codes,
with national fuel gas code, ANSI Z223.1/NFPA54, natural gas and propane
Installation Code, CSA B149.1, or propane storage and handling code, B149.2
A
may be hazardous and should be checked by your local
supplier. Never use a
with a damaged valve connection. The
must be constructed
Department of Transportation
(DOT) or the standard for cylinders, spheres and tubes for transportation of
dangerous goods and commission, CAN/CSA-B339.
for the appliance.
cylinder
under or near this appliance.
valve outlet whenever
the
is not in use.
Only install
of dust cap on the
valve. Other types of caps or
plugs may result in leakage of
.
Содержание KLD7002SSBN
Страница 4: ... 4pcs pre assembled in head M6 screw Qty 12 Qty 3 ...
Страница 6: ...3 4 ASSEMBLY ASSEMBLY ...
Страница 7: ...ASSEMBLY ASSEMBLY ide Hardware Used Washer Wing Nut ...