manualshive.com logo in svg
background image

Before installing the mixer, check that the available electrical supply match that 
of the mixer as stated on the mixer’s rating plate. 

Installation

 

Unpacking 

 

Immediately after unpacking the mixer, check it for possible shipping damage.  If this machine is 

found to be damaged after unpacking, save the packaging material and contact the carrier within 

one day of delivery. 

 
 

Location 

 

Place the mixer in its operating location - this should be a sturdy level surface.  There should be 

adequate space around the mixer for the user to operate the controls and install and remove the 
bowl. 

 

Holes are provided in the base to permanently secure the mixer, although this not necessary in  

normal installations. 

 

Floor models must be leveled front-back and side-to-side by sliding shims under the legs as  

required. 

 
 

Electrical Connection 

 

The supply cord on this machine is provided with a three-pin 13A fused and earthed plug.  It is  

imperative that the outlet to which this plug is connected is properly earthed (grounded). 

 

Prior to installation, test the electrical service to assure it agrees with the specifications on the  

machine data plate located on the rear side of the pedestal. 

 

Permissible voltage fluctuation is ± 10% of nominal voltage. 

 

Components having adjustments protected (e.g. paint sealed) by the manufacturer, are 

only allowed to be adjusted by an authorised service agent.   

 
 

Rotation 

To start the motor, push the 'ON' button.  The speed selector handle must be on one of the  

numbers indicating a speed and not located between the numbers. 

Figure 1 

Содержание BM60


















Отзывы: