9
ASSEMBLY
9
While supporting heater, tilt the Head Assembly
C
and slide 3 Large Flat Washers over the
Hardware Used: 6x Large Flat Washer
3x Wing Nut
10
Connect the hose and regulator to the LP cylinder.
The LP cylinder is sold separately. Use a standard
kg
/ 20 lb propane cylinder only. Lift the Tank
Housing
D
up and rest it on the top of the assembled Post
Supports
I
. Screw Regulator
H
onto Gas Hose
E
. Do not
cross thread. Hand tighten securely then tighten with
. Attach the Regulator to the
valve on the LP cylinder and hand tighten securely. Place LP
tank onto base of heater. Secure the LPG tank by attaching the
Chain
L
onto the post supports. Lower the Tank Housing.
supply
system. See chapter 5 of the standard for storage and
Contact us for assistance: [email protected] | (800) 561-5550