ASSEMBLY
7
Attach Head Assembly
C
to Upper Post
F
. Route
Gas Hose
E
down into Upper/Lower Posts
F
/
G
and
align 4 small holes on the Head Assembly
C
with 4 Small
holes in the Upper Post
F
. [HINT: Control knob should be
above decal on post.] Insert the 4 Small Bolts with Lock
Washers through the aligned 4 holes and tighten
securely with the Wrench .
Hardware Used: 4x Small Bolt w/Lock Washer
8
NOTE: MAKE SURE TO REMOVE THE
BLUE REFLECTOR TAPE ON REFLECTOR PIECES PRIOR TO
ASSEMBLY!
Slide two
A
together. Insert one Small Screw
.
Screw on Cap Nut
loosely.
Repeat with the other
A
.
Slide
B
onto assembled
Panels
Insert one Small Screw and screw on Cap Nut oosely. Repeat
with two more Small Screws and
cap nuts.
Hardware Used: 12x Small Screw
12x Cap Nut
Contact us for assistance: [email protected] | (800) 561-5550
