background image

19

Be careful not to allow any part of the body (especially the head or neck) to enter the gap between 
the side-rail and the mattress base or the mattress. When the head or neck enters the gap, the patient 
might not be able to withdraw, and there is a risk of injury.

Be especially careful to check patients who might act in unexpected ways or cannot maintain their 
posture independently.

Do not adjust the side-rails from inside the bed. The side-rails may drop suddenly and there is a risk
of injury caused by a patient falling off the bed.

Do not let patient lean against the side-rail while it is raised. The patient may lose a balance and 
there is a risk of injury caused by a patient falling off the bed.

Do not place legs on the side-rail while it is lowered. The bed could turn over, resulting in injury.

When raising side-rails, make sure that the side-rails are locked. If the side-rails are not completely 
locked, they may move unexpectedly, resulting in injury.

Take care to prevent the intravenous tubes or the drain tubes from getting caught. When operating 
the side-rails, tubes could get caught between the side-rail and mattress and be damaged, resulting
in injury.

When performing the height adjustment with the split type side-rail lowered, do not place legs 
under the side-rail. There is a risk of getting caught, resulting in injury.

When operating the side-rails, make sure that the patient’s hands or feet have not entered the gap 
between the side-rail and mattress base. When the hands or feet enter the gap, the patient could get 
caught in the gap, resulting in injury.

When operating the side-rail with the back section base raised, operate the side-rail with caution. 
Depending on the back section base angle, the side-rails may move unexpectedly and there is a risk 
of injury.

OPERATION PROCEDURES

5

Содержание A5 Series









































Отзывы: